Other

- Aheadset preload adjusting bolt

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

All-City Singlespeed Disc Brake Adaptor 

Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Extruded and CNC-machined from 6061-T6 aluminum, Box Two™ Stem Spacer Kits feature a lightweight design. Weights range from 0.24 to 0.29 ounces (6.7 to 8.2 grams), depending on the size. Sold in packs of five, each set provides spacing adjustments from 1 to 20 millimeters. FEATURES - Lightweight Design - Adjustment options from 1 to 20 millimeters - Fits 1" or 1-1/8" Steerer Tubes and Standard 22.2mm Handlebars SPECIFICATIONS - Inner (Ø) 1" or 1-1/8" - Height 1mm, 3mm, 5mm, 10mm 1mm, 3mm, 5mm, 10mm - Material 6061-T6 Aluminum 6061-T6 Aluminum - Weight 6.7 grams / 0.24 ounces 8.2 grams / 0.29 ounces

The Box One Cassette Spacer Kit is extruded and CNC-machined from 6061-T6 aluminum and features a super lightweight minimalist design. Packaged in 4-piece kits which provide 1 to 10 millimeters of spacing adjustment to dial in that chain line. FEATURES - Adjustable from 1mm to 10mm for Adjusting Chainline - Extremely Lightweight XO Skeleton Design SPECIFICATIONS - Material: 6061-T6 Aluminum - Extruded & CNC Machined - Anodized Finish - Spacing: 1-10mm (1mm [2], 3mm [1], 5mm [1]) - Driver: HG Freehub Body

Box Two™ Fixed Seat Clamps are made from the finest 6061-T6 aluminum and cold-forged for strength. They are available in multiple sizes to suit a wide variety of seat tubes and riding styles. FEATURES: - Machined Rigid Frame - Secure Fixed Design SPECIFICATIONS: - Material: 6061-T6 Aluminum - Process: Cold-Forged - Hardware: Chromoly - Finish: Anodized w/Laser-Etched Graphics Size & Weight: - 25.4mm: 7 g / 0.2oz - 31.8mm: 12 g / 0.4oz

- Ultralight, CNC-machined 6061 aluminum spacers for fine-tuning stem height - Includes one each: 3, 5, 10mm spacers and two each: 1mm spacers

Box Two Quick Release Seat Clamps are cold-forged, and CNC machined from 6061-T6 aluminum alloy. Weighing in at just 27 grams/0.95 ounces in the 31.8 size, they are as lightweight as tough. The head of the quick-release lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing. Meets or exceeds ENM standards.

Cold-forged and CNC machined from 6061-T6 aluminum alloy, Box One Fixed Seat Clamps are tough, lightweight, and exceptionally good looking. Featuring titanium hardware and laser-etched graphics, Box One Fixed Seat Clamps are available in anodized black, blue, red, and silver.

Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.

- CNC-machined 6061-T6 aluminum with titanium hardware - Zero-friction cam surface treatment ensures smooth lever action - 31.8mm - 27g

Box Two™ Brake Post Extenders are the perfect solution for those riders needing extra brake pad adjustment without switching frame sizes. CNC-machined from 6061-T6 aluminum, Box Two™ Brake Post Extenders easily mount to any frame's existing cantilever brake bosses. They provide an additional 16 mm of brake arm positioning. Typically, they are most useful when a rider transitions from one wheel size to the next (i.e., 451 to 406). Depending on your application, they can be mounted in either one of two positions -- above the frame's v-brake mounts or below (see Technical). FEATURES: - Cantilever brake boss compatible - 16 mm of brake arm positioning - 6061-T6 aluminum - Thread M10 x 1.25 SPECIFICATIONS: - Material: 6061-T6 Aluminum - Thread: M10 x 1.25 - Weight: 32 grams / 1.1 ounces

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

- KlickFix bracket for use with all Basil handlebar bags requiring a KlickFix adapter - Easily & quickly removable - Suitable for handlebars measuring 22mm to 31.8mm - Made form composite materials - Adjustable angle

- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation

- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy

- Alloy 1-1/8" seatpost clamp - Single bolt

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel - Attaches to rear cable guide and routes two cables around seat post

- Cable hanger and straddle cable - Alloy construction - Anodized finish - Great for Canti and U-Brakes

- Alloy 1-1/8" seatpost clamp - Double clamp design for extra holding power on BMX bikes

- Alloy top cap with hollow bolt to allow for brake cable pass-through - ED black durable finish - Size: 1-1/8"

- Bar end plugs - Sold in pairs

- Aluminum cups w/ steel hardware - Converts a non-threaded 68mm American BB shell to use an English-threaded Euro BB - Shell: 68mm - Interface: American - Spindle Type: Euro - Cup Material: Alloy - Weight: 104g

- Saddle clamp for straight seatpost - Diameter: 22.2mm

Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter

With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments. - Follow laser-etched torque listing on collar

Lock it and drop it Upgrade the look and feel of your MTB XC race cockpit with the DropLock Remote. By combining a dual-suspension lockout remote with an integrated dropper lever, you get a single remote that controls the functions of your suspension and dropper post. For the lockout, a single button controls both the on and off function of front and rear suspension. A single remote that combines a dropper lever with a dual-control suspension lockout for simple operation and clean setup. - Integrated dropper and dual-remote lockout lever for a cleaner cockpit - Single lockout lever controls both on/off - Removeable dropper lever - Compatible with mechanically activated droppers and suspension lockout systems

In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.

Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing

Small screw that adjusts spring tension.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries

Campagnolo front derailleur parts for repairs.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.

Campagnolo Extra Parts

Campagnolo front derailleur parts for repairs.

Campagnolo EKAR disc brake adapters. - Includes bolts

Campagnolo EKAR disc brake adapters. - Includes bolts

Campagnolo front derailleur parts for repairs.

Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs

Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs

Campagnolo Extra Parts

Campagnolo Pulley Assemblies

Campagnolo Pulley Assemblies - Drivetrain Speeds: 10 - Does not fit 2004-2008 Record 10 speed (carbon pulley cage)