Filter By:

  • Show More Brands
  • Show Fewer Brands

Stems

Bontrager Elite Blendr Stem
$64.99
Stiff and light with the cleanest accessory solutions available When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup. Key features - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Safe for use on carbon steerer tubes and handlebars - Includes one Blendr base to integrate Ion lights and Trip computers.
Bontrager Elite Blendr Stem
$64.99
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer, and more with Blendr Elite accessory integration. - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Includes one Blendr base to integrate Ion lights and Trip computers
Ritchey WCS C260 Stem
$99.95 - $109.95
Ritchey's WCS C260 stem starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware, and stem body. The steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube. The body is 3D-forged from an advanced 7050 aluminum and internally machined for further weight reduction. Premium quality chromoly steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity. - Stack Height: 42mm - Faceplate width: 36mm - Weight: 103g (100mm)
Easton EA70 Stem (+/- 6-degree)
$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
Easton EC90 SL Stem (10-degrees)
$249.99
Bolt Easton's EC90 SL Stem to your road bike and watch the grams disappear. This ultra-light carbon beauty sports Easton's TaperWall technology to provide the perfect balance of low weight, high strength and stiffness for excellent steering control in all conditions. Plus, Easton's Top Lock and Distributed Stress technologies lock the stem and faceplate together, allowing for a highly rigid interface while minimizing loads on the bolts, making the EC90 SL perfectly safe for carbon bars. What's more, the EC90 SL uses titanium hardware to keep weight to an absolute minimum.
3T Integra LTD (-10-degrees)
$349.99
3T's Integra LTD stem is the perfect solution for any Garmin Edge owner. A Garmin-specific mount is built into this stiff, streamlined stem to keep your cockpit tidy and aero. The Integra's carbon construction keeps it rigid and light for sprints and climbs alike. If you're not riding with your Garmin, or if you don't even own one, the Integra can be fitted with its front end plate for an even more aerodynamic look.
Pro Missile Evo Carbon Stem
$399.99
- Full UD Carbon aerodynamic design - Integrated (Shimano Dura Ace Di2) shift cable routing - Developed for use with the Missile Evo aerobar for optimal aerodynamics and optics
Ritchey WCS Carbon Bullmoose Handlebar
$299.95
- Rebirth of the iconic bar/stem combo - Carbon monocoque with alloy steerer clamp - Steerer diameter: 1-1/8" - Stem length: 70-110mm - Rise: 6 deg - Width: 720-740mm - Back sweep: 9 deg - Color: UD carbon - Weight: 285g
Race Face Turbine 35 Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Sunlite Adjustable Quill Stem
$26.99
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.
Ritchey Comp 4 Axis Stem
$19.95 - $39.95
- 3D net forged 6061 alloy construction - Angled steer tube clamp slot reduces stress on carbon steer tubes - Stainless steel bar and steerer clamp bolts - Material: 3D net forged 6061 - Angle: +/- 6 degree - Steerer Height: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Bead-blast Black finish - 160g (110mm)
Profile Design Aris OS Road Stem (+/-25-degree rise)
$47.49
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
3T ARX LTD Stem (+/- 6-degrees)
$334.99
3T's ARX LTD stem is the perfect finishing touch for your carbon superbike. It's made of carbon with titanium bolts for light weight and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate.
Profile Design Boa Threadless Stem
$27.99
Comfort is king when you dial in your riding position with Profile's Boa Threadless Stem. This light and durable welded-aluminum stem features a 20- to 40-degree rise and a secure two-bolt faceplate that makes installing the handlebars a breeze.
Salsa Guide Stem
$40.00
Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40
Thomson Elite X2 Road Stem
$99.95
Thomson's Elite X2 Road Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X2 combines exceptional strength with light weight for a stiff stem and total control on all your rides. It has a two-bolt clamp design that's just as strong as four-bolt designs thanks to Thomson's interlocking interface and it also cuts down on the weight. Plus, the stem's low 36mm stack height gives you more options for customizing your position. And, thanks to their reversible graphics, your X2 looks great whether you run a positive or negative rise.
TruVativ Holzfeller Direct Mount Stem
$90.00
Steep descents, nasty rock gardens and high speed: all in a day's work for TruVativ's burly Holzfeller Stem. Made from oversize 3D forged aluminum for serious strength, the Holzfeller thrives on gravity-fueled abuse. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the direct BoXXer mounting delivers pinpoint steering precision and stiffness.
Zipp Service Course SL Stem
$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
TruVativ Descendant Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Race Face Aeffect
$39.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
Dimension 25.4mm Threadless Stem
$29.99 - $32.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
Answer Products DH-One Direct Mount Stem
$75.00
- Negative rise stem (-20mm stack height) - 7075 aluminum with wide 63mm faceplate - Fits 2005>current BoXXer, Fox 40, Dorado, and 2012+ 888 forks - 150g with A2 stainless hardware
Ritchey Classic C-220 Stem
$69.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
Answer Products AME Stem
$75.99
- 3D Forged stem body and face straps create extremely strong and lightweight stem - Opposed clamp bolts compatible with carbon steer tubes - 31.8mm diameter bars only - 50mm length - 0 degree - All stems come with 3.5mm spacers, top cap and star nut
Thomson Elite X4 Mountain Stem
$99.95 - $109.95
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
Easton EA50 Stem (+/- 8-degree)
$39.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
Easton EC70 SL Stem (+/- 6-degrees)
$139.99
Easton pushes the envelope yet again with their EC70 SL stem. The combination of carbon fiber and super-stiff aluminum makes this one of the stiffest stems on the market, and the 140 gram weight is nothing to complain about. The performance train keeps rolling with titanium hardware, exclusive TaperWall tech, and Easton's TopLock faceplate.
Parlee Cycles Stem
$325.00
Parlee’s carbon stem is a masterpiece of strength, beauty and performance. It utilizes a 35mm bar clamp diameter that offers sharp steering precision while the two-part face plate is forged for longevity. Titanium bolts are mated to replaceable aluminum inserts throughout, protecting your investment from cross threading and other mechanical damage. - Weight: 125g
TruVativ Stylo T30 Stem
$59.00
TruVativ's Stylo T30 Stem is 3D forged from 7050 aluminum for that perfect balance of low weight, stiffness and precision steering control uphill or downhill. Four bolts securely attach the face plate and also make changing out handlebars a breeze.
Dimension 26.0mm Threadless Stem
$29.99 - $32.00
Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g
Page 1 of 6 Next page