Bottom Brackets

- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The SRAM DUB bottom bracket series has a simple job- to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system

Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (Road: 86.5mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame

Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Greater bearing durability - Easy installation - PressFit cups for lighter weight

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (MTB: 89/92mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel

TruVativ's Howitzer Team Bottom Bracket is THE workhorse built for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm spindle (SRAM DUB) cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm - 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 29mm (DUB) - Over Bearing Width: 92mm in 86.5mm wide shell (Dimensions include supplied silicone dust shields) - Weight: 90g Complete kit for one frame includes: - (2) Enduro BB86 to 30MM Dual-Row ABEC-3 Bearing - (2) 0.5mm crank spacer - (2) 1.0mm crank spacer - (2) 5.0mm crank spacer - (2) Dust seals

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 115g

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

T47 threaded BB cups to run 30mm spindle cranks on T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68 – 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - For Super Boost+ cranks - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket. - 2 lines of bearings on each side

Bottom brackets from FSA for non-threaded applications. - 24mm spindle compatibility - Stainless steel bearings - Spindle Interface Type: FSA MegaExo - BB Shell Width: 92mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB92

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

The Revolver bottom bracket features two sealed bearings and 6061 Alloy CNC machined cone spacers with weight-saving tear-drop slots. - Precision sealed bearings - Swaged waist tube spacer for 73mm BB shells - Spindle size: 19mm or 22mm - Shell Size: Mid - Tube Spacer: Swaged waist with 5mm spacer - Spacers: 2.5mm alloy (x4) - Weight: 4.0-ounce

- Bottom bracket for one-piece crank - Sealed mechanism - 24 TPI - Spindle Type: One piece - Cup Material: Steel - Weight: 310-315g - Cup Type: Press Fit - Cup OD/Bearing OD: 51mm

Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you're running the best crankset on the market, you should have the performance BB to match. - Thinner and lower viscosity bearing grease for higher durability at high speeds - In-house testing procedure includes developing a 24-hour continuous water invasion test - Offered in a variety of types for better compatibility - 386 EVO 46mm Press fit, 30mm Spindle, 103gm, 86.5mm

Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)

The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet

- Fits 3-piece crank set - Includes right and left cup, lockring and bearings - English type - Shell: 68/73mm - Cup Material: Steel - Weight: 123 grams

- Thread: BC 1.37 x 24T - Caged bearing 1/4" x 9 - Fits most square taper cotterless BB axles - Spindle Type: SQR JIS - Cup Material: Steel

- One-piece bottom bracket cup set - Bearings included - Fits smaller american juvenile/youth sized BB - Shell: 65mm - Cup Material: Steel - Weight: 173 grams

- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

- Forged steel body - Alloy cups - Chromoly spindle - Sealed bearings - Interface: English - Spindle Type: Square Taper JIS - Weight: 290-300 grams

T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 2.5mm crank spindle spacer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 29mm - Over Bearing Width: 90.8mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 155g Compatible with the following Bottom Bracket Standards (47x1.0mm Threaded BB shell) and 29mm diameter spindle SRAM DUB compatible cranks: - T47 shell with a width of 68mm and SRAM DUB Road Crank - T47 shell with a width of 73mm and SRAM DUB MTB Crank - T47 shell with a width of 100mm and SRAM DUB Fatbike Crank

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 127g

BBright is the Cervelo bottom bracket standard found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super-round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. BBright is similar to BB30, but is wider on the non-drive side. As such, the bottom bracket for running 24mm diameter cranks from Shimano, FSA, and others, is unique. The CeramicSpeed Standard Bearings last at least three times longer than other bearings. Thanks goes to hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. These have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to most BBs. The CeramicSpeed Coated Bearings reduce drag by 50% compared to CeramicSpeed Standard Bearings, and show an improvement in bearing life by 60%. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. You have two bearing choices. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BB86 - Opening diameter: 41mm - Shell width: 86.5mm In the box: - 2 CeramicSpeed Bearings - 2x dust covers - Plast-sheet - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet

- Replaces standard BB90/95 press-in bearings commonly found on Trek bicycles with a solid, unified thread-together bottom bracket interface - Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are serviceable - Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles - Requires a special tool for installation (P/N# 610756)

- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing SRAM DUB 28.99mm spindle cranks into PF30 frames - Shell: 68/73mm x 46mm - Interface: PF30 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061/Nylon Fiber - Weight: 125g

Origin-8's ISIS Bottom Bracket is everything you need to get your wheels rolling. It features a steel body and hollow-chromoly spindle that adds stiffness and cuts down on weight. The sealed bearings are super smooth and durable, and this fine BB is available in 3 sizes with a 68mm shell.

Origin8's Revolvr BB86/92 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups offer a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. Models are available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles. - Replaces all standard BB86/92 press-fit bottom brackets - Shell: 86-92mm x 41mm - Interface: BB86/BB92 - Cup Material: AL6061/Nylon Fiber - Weight: 103g

- Designed for fat tire bikes - Chromoly spindle - Sealed bearings

- Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are serviceable - Designed for installing SRAM DUB 28.99mm spindle cranks into BSA threaded frames - Shell: 68/73mm - Interface: ENG - Spindle Type: DUB - Cup Material: AL6061 - Weight: 100g

SRAM's GXP PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

Origin8's Revolvr thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life. Their hybrid AL6061/Nylon fiber cups deliver a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing Shimano HTII 24mm or SRAM GXP 22/24mm spindle cranks into BB30 frames without the need for adapters - Shell: 68-73mm x 42mm - Interface: BB30 - Material: AL6061/Nylon Fiber - Weight: 123g

Expand your choice of cranks for use in BB86/BB92/BB91/BB71-41/BB107 frames. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks (FSA BB386EVO, Rotor 3d+, RaceFace Next SL, e.thirteen) cranks in your frame. These bearings fit directly in frames with 41mm ID smooth bore bottom bracket shells.You must use 30mm spindle cranksets with spindle lengths longer than 104mm. - Bearings: Enduro Dual-Row ABEC-3 - Dimensions: 41mm x 30mm (42mm flange OD) - Color: silver - Bottom Bracket/Frame Interface: BB86, BB92, BB91, BB71-41, BB107/104 - Bottom Bracket Shell Width (mm): 86.5mm - 107mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: BB386EVO, BB30 longer than 104mm - Crank Spindle Diameter: 30mm - Weight: 89g

This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve

Box Two 24mm External bottom brackets feature cold-forged, CNC-machined alloy cups, dual-labyrinth bearing covers, and precision sealed bearings. They are the perfect match to Box Three, Four cranks, and the ultimate upgrade to the budget BBs sold with most cranksets. Box Two, 24mm External Bottom Brackets, are designed to fit all 24-millimeter crank spindles and frames with 68 or 73 x BC 1.37-inch bottom bracket shells. Features: - Stable Outboard Bearing Position - Precision Abec-5 Sealed Bearings Compatibility: - Compatibility: Box Three, Box Four, Shimano HollowTech II, RaceFace X-Type - Material: 6061-T6 Aluminum - Shell Width: 68mm/73mm - Spindle Type: 24mm - Thread: 1.37 Inch x 24 TPI - Weight: 105 grams / 3.7 ounces Specs: Process: CNC-Machined Cups Material: - Cups: Alloy - Sleeve - ABS Plastic Finish: Anodized Spindle Type: 24mm Shell Width: 68/73mm Thread: 1.37 Inch x 24 TPI (English) Compatibility: - Shell: BSA (Euro) Threaded - Spindle: Box Three, Box Four, Shimano HollowTech II, RaceFace X-Type Weight (+/- 5%): 105 g / 3.7 oz

Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets

Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family. - Compatible with standard threaded BSA shells - Standard 6806 retainer bearings - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits - Inner sleeve protects against water - Rubber seal located on the bearing's external side helps to reduce the risk of water penetration

Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 114g

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

- Replaces standard BB90/95 press-in bearings commonly found on Trek bicycles with a solid, unified thread-together bottom bracket interface - Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - OS versions are designed for use in frames with worn-out, oversized bottom bracket shells - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are serviceable - Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles - Requires a special tool for installation (P/N# 610756)

The game-changing DUB family goes ceramic. While DUB has been simplifying the game, eliminating compatibility frustration and confusion for years, the DUB ceramic bottom bracket gives riders an additional option for even more silky-smooth performance. This is a whole other level in bottom bracket friction reduction, thanks to its high efficiency, ceramic bearings. What's more, the DUB ceramic bottom bracket can help riders save precious rotational energy without sacrificing the kind of robust seals required for real MTB and road racing scenarios - High-efficiency ceramic bearings save riders rotational energy - Silky smooth, without sacrificing robust seals required for real-life durability MTB and racing scenarios - One oversized spindle to work across every bottom bracket standard - PressFit 30 (68-73mm) Road Wide Specifications: - Spindle Interface Type: SRAM DUB - Bottom Bracket Shell I.D.: 46 - BB Shell Width (mm): 68 - Defined Color: Black - BB/Frame Interface: PF30 - Weight: 120

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

BBright is the Cervelo bottom bracket standard, found on most of their frames, save the P5. In order to fit 24/22mm-spindle SRAM and Quarq cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super-round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. BBright is similar to BB30, but is wider on the non-drive side. As such, the bottom bracket for running 24/22mm-spindle SRAM and Quarq cranks, is unique. The CeramicSpeed Standard Bearings last at least three times longer than other bearings. Thanks goes to hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. These have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to most BBs. The CeramicSpeed Coated Bearings reduce drag by 50% compared to CeramicSpeed Standard Bearings and an improvement in bearing life of 60%. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet

Pedal smoothly and steadily with Origin-8's Torqlite Square-Taper Bottom Bracket. The forged aluminum body and cups are light and tough, the CNC'd hollow-chromoly spindle is stiff and shaves more grams, and the sealed bearings are super smooth and durable.

SRAM's GXP Team PressFit MTB Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

Campagnolo's Power-Torque Bottom Bracket Cups are perfect for your Campy Power-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm

High performing square bottom bracket interfaces with English frames. - Fits square-taper spindle cranksets - Alloy adjustable cups - Includes 2 axle bolts