Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Proper fit on your bicycle isn't just for the pros. Swap out the old stock stem on whatever bike you ride for the adaptable Bontrager Comp alloy stem. - Construction: 6061-T6 forged and welded body - Removable 2-bolt face plate - Opposing 2-bolt steerer tube clamp - Corrosion-resistant steel bolts - Suitable for road or mountain use - Safe for use on carbon steerer tubes and handlebars - 50mm stack height
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
$36.99 - $39.99
Origin-8's X-Tra Lift Stem Riser is an adapter that lets you raise your handlebars and stem. It fits over and securely bolts to 1 1/8-inch forks to extend them. This gives you more height to raise your stem/bars. You use the included spacers to dial in the best fit. The Stem Riser is made from forged 6061 aluminum and is anodized for durability.
$29.99 - $32.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
A Blendr-ready stem at home on the road or mountain bike The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes. Key features - 6061-T6 cast body construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts - Blendr ready for seamless accessory integration - Compatible with Blendr Elite bases and Blendr mounts - Suitable for use on a road, city, or mountain bike - Safe for use on carbon steerer tubes and handlebars
$29.99 - $32.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
$29.99 - $32.00
Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
$60.99 - $75.99
Named after the multi-headed serpent from Greek mythology, the WeThePeople Hydra stem really is a beast of many heads. It's available in two rise and two clamping options, and utilizes shark tooth clamping inside the stem body to provide a vise-like grip. The hydra is one stem that won't let your bars slip any time soon. The hydra is one of the first stems on the market to be available in the 25.4mm oversize clamp option. Pair it up with any of our 25.4mm handlebars to have a truly indestructible front-end setup.
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
- High strength and ultra-low weight combined with a low 40mm stack height make for a great all around stem - Stem is horizontally divided and machined in two pieces, enabling weight to be reduced to the absolute minimum without compromising strength
A favorite of FMB Freeride pros, All Mountain warriors, and Enduro racers alike, the SPIKE Race Stem blends tough and sexy seamlessly. 2D Forged for ultimate strength, then CNC weight-optimized in every way, the SPIKE Race Stem might be a lightweight, but its iconic hourglass sectional profile lends the immense torsional stiffness required by SPANK's pros. The burly 31.8mm bar clamp zone is chamfered to reduce stress risers and increase fatigue life in handlebars. Available in super-short 35mm or conventional 50mm lengths, with a minimal stack height, the SPIKE Race Stem brings style and confidence to any ride. - Key technologies: MGR, chamfered bar clamp, "Snap Fit" sealed top cap - Material: 2D Forged MGR Alloy, CNC Weight Optimized - Length (mm): 35 / 50 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±150 (35mm) / ±180 (50mm) - Finish: polish anodized, CNC/laser logos - Technologies: MGR - Discipline: race / freeride
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Tom Dugan's signature DGN stem is a classic top load design. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined
The CFL 02 stem ventures into more traditional territory. This is a timeless front load with a 6 bolt clamping configuration. Features: - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined Specs: - 53mm reach - 7.5mm rise - 11.4 oz
$64.00 - $66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall
- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish
Basic, clean, and dependable performance – that’s FSA's Gossamer stem. 6061-T6 aluminum is forged and then CNC machined to achieve the Gossamer’s shape. The four-bolt faceplate is cold forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - Stack Height: 40mm - Weight: 154g
- Full UD carbon construction stem - 4 bolt aluminum faceplate for added rigidity - Stainless steel hardware - Reversible +/-7° angle - 40mm stack height - 125g weight in 100mm length - ISO-Road safety certified
- Solution for riders wanting to raise their drop bars for added comfort - 225mm tall quill (210mm above the min insertion line) - Forged aluminum - 22.2mm quill - 25.4mm clamp - 386-415g
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Bolt Easton's EC90 SL Stem to your road bike and watch the grams disappear. This ultra-light carbon beauty sports Easton's TaperWall technology to provide the perfect balance of low weight, high strength and stiffness for excellent steering control in all conditions. Plus, Easton's Top Lock and Distributed Stress technologies lock the stem and faceplate together, allowing for a highly rigid interface while minimizing loads on the bolts, making the EC90 SL perfectly safe for carbon bars. What's more, the EC90 SL uses titanium hardware to keep weight to an absolute minimum.
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch. • Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
Page 1 of 7 Next page