PF30A is a Cannondale-specific standard for their 73mm-wide bottom bracket shells. This CeramicSpeed kit makes it possible to install Shimano and other 24mm diameter cranks into a Cannondale frame.
CeramicSpeed Bearings come installed in two cups and are connected through the shell via a spacer tube. It's available with either Standard or Coated Bearings. Both have super-round CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated bearings have an additional attribute: a 3-micron-thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life.
The unique PF30A shell is 73mm wide with a 46mm diameter. These cups and bearings adapt the shell so it is compatible with Shimano, FSA, and other cranks with 24mm spindles.
Our CeramicSpeed Standard Bearings generate just 0.3-0.4 watts of frictional drag. That's a reduction in drag of 75% compared to stock bottom brackets. This is the result of great design: hardened-steel races combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer.
The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings.
All Round Grease comes pre-installed in the bearings. It can be replaced for lower-drag TT and Track Grease or higher-durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions.
In The Box:
- 2 CeramicSpeed bearings pressed into cups
- 2 installed dust covers
- Spacer tube
- 10ml syringe of All Round Grease
- Installation tool
- Sticker Sheet
|Black / PF30A / Standard / 24mm / 73mm||05711050040230||104894|